What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Every person may have their private idea about What Would Cause My Electric Water Heater to Stop Working?.
Many modern houses use an electrical water heater for their furnace, as a result of its convenience and also convenience of use. Nevertheless, similar to any other electric appliances, problems may arise with its use, all of a sudden. It can be truly irritating to awaken to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient and even as well warm. Whatever the situation may be, water heater problems can be quite nerve-racking. Fortunately, we've made a list of feasible remedies to your hot water heater concerns. There are a variety of aspects that might cause a number of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for security. Whatever the problem is, getting it fixed must not position excessive of an issue if you adhere to these actions:
Check Your Power Supply:
As standard as this might seem, it is really required. Without adequate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply turn it on and off again. Change any busted or worn-out fuse. Check the device with power after these modifications to see if it's currently working.
Inspect the Burner in the Water Heater:
If it's not a power trouble, after that attempt looking into your heating element if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any of them. If any one of them is defective, change that part and afterwards examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm enough, you may require to inspect the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This must assist heat up the water. Turn the circuit breaker back on and also check if the problem has been solved.
Call A Specialist:
If after replacing all defective parts and resetting your temperature, the hot water heater still isn't functioning, you might need to speak to an expert plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the case might be, a professional plumber would certainly help fix the problem.
Final thought
Water heater issues are not constantly major. A number of them are due to small issues like a blown fuse or damaged heating element. Changing the defective parts must do the trick. Nonetheless, if you are still unable to fix the problem, give a call to your nearby plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt about How to Troubleshoot and Repair an Electric Water Heater. Thanks a lot for spending some time to read through our blog post. In case you appreciated our blog posting plz remember to pass it around. Thanks for going through it.
Customer Reviews
Report this page